Меню

Настройка saitek x55 для dcs



настройка saitek x55 для dcs

Настройка saitek x55 для dcs

Hi all, i recently downloaded DCS World to try out with my new Saitek X55 HOTAS. I am having a problem however with my throttle axis and it seems to be in only this game it happens, it doesn’t occur in War Thunder, iL2: CLOD, Elite: Dangerous.

When i’m setting my controls up ingame, it detects both the throttle and joystick as it gives me two seperate collums to map buttons to, three if you include the default controls.

When trying to set the throttle axis it reports back as Axis X, not Axis RX as it should be. However when fiddle with the 4 Rotaries on the Throttle they are being reported as RX, RY, RZ etc.

Does anyone know of a solution to getting the throttle to be read correctly ingame?

Using the Toggle switches and different modes in-game work fine as does the joystick. Only the Throttle and the other axied controls are causing issue.

Hi, check my screenshot, are you able to select the axis manually in the drop down menu? Also I don’t own a X55 but on my TM Hotas Warthog Joystick and Throttle are different controls.

Edit: Just to make sure, you are trying to set them in «Axis Commands» ? (see on my screen right next to SU-25T)

These are the options i get.

Sometimes if i move the throttle fast enough to stop abruptly at 110% it will sometimes report back as Joy_Y instead of Joy_X as it does at the moment.

I’m guessing its a driver/software issue from Saiteks end?

These are the options i get.

Sometimes if i move the throttle fast enough to stop abruptly at 110% it will sometimes report back as Joy_Y instead of Joy_X as it does at the moment.

I’m guessing its a driver/software issue from Saiteks end?

Could be, is the stick officialy released by now?

Btw on your screenshot you are selecting the Thrust axis. Does the Thrust Left axis and Thrust right axis work correctly? And did you try it ingame?

The Logitech G940 is also reporting back JOY_X/Y axis with the throttle so it can be the way they designed the Axis.

Yeah the X55 was released last month in the UK as far as i’m aware? I ordered it on the 2nd of May from the Mad Catz UK Store (GameShark) and got it on the 6th, it would have been soon but weekend and bank holiday.

However, i’ve just given it a blast with the Thrust Left and Thrust Right and its the exact same deal.

That’s the problem though ARGH, I don’t have a Slidder option. Elite: Dangerous which is in Alpha still recognises all of the Axis’ properly.

I’m only getting options for the 3 Joystick Axis (X, Y and Z) and 3 of the Axis for the rotaries (RX, RY and RZ) and if I remember correctly one of the other rotary Axis comes up as Joy_Y.

I’m at work at the moment so can’t have a look at it at the moment l but it seems most likely a driver issue, I’m going to report it to Saitek and DCS developers when I get home at 7pm.

what the feck, I’ve been looking for the rhino since Febuary. Apparantly its not going on sale untill next week where I live. Globalization is great except when capitalism and big corps don’t want it (NOT LOOKING TO START AN IDEOLOGICAL DISCUSSION)

On topic: Can you reverse the axis in the saitek software? (If I’m understanding the problem that is..)

I must be explaining myself wrong?

The throttle is being recognised as a actual joystick input and not as a throttle unit input. So if i set use the throttle slider for Thrust, it will come up as Joy_X which is infact the X Axis on my stick. So when i use the throttle it will move the ailerons instead.

Yeah i managed to sort it in the end. I can’t remember what the problem was but i think it was something to do with what you suggested. I haven’t played DCS in a while due to having hard drive issues (on my 3rd windows reinstall since May) but if i remember, due to the HOTAS’ name being so long, it was hard to read what column was what.

Читайте также:  Stranded deep настройка управления

Hopefully thats been fixed?

.. due to the HOTAS’ name being so long, it was hard to read what column was what.

Hopefully thats been fixed?

Hovering mouse cursor over the name of column shows full name in a tooltip now.

Tooltip also seems to show GUID for device information and so on.

I have an X55 as well (loving it so far) and yes the left throttle is detected as X (or Y) and the right as the other direction. This isn’t an issue though as your joystick and throttle are detected as two entirely different controllers so the X axis on one won’t step on the other. If you are playing games with a single throttle just make sure you raise one of the two throttles so you only get one axis for the control. After that you can raise both at the same time so long as you don’t link the other throttle to something. Anyway hope this helps, but from what I’ve seen it appears to be working as intended.

Have fun! It’s a great stick and really made A-10c and Black Shark much more enjoyable. Also it’s nice only having to load a profile once when I turn on my PC (I liked a button to center my TrackIR) rather than for each aircraft and different sims/games. Having to switch between my A-10 profile and BS profile sucked and since the profiles had to use keypresses rather than buttons/sliders it could cause issues where I would forget that a slider was activating a button and so it would continue to broadcast that button whether I was in game or not, or in another game!

Настройка saitek x55 для dcs

Добры день! В DCS World запускаю пробный учебный полет СУ25Т. Джойстик Saitek X56.
В настройках игры изменены только настройки РУД (без предварительной настройки ручки тяг двигателей летали туда-сюда при малейшем движении почти любого элемента управления на джойстиках).

Итак, запускаю тренировочный полет. И сталкиваюсь с проблемой: самолет постоянно поворачивается то влево, то вправо вдоль продольной оси. Либо начинает задирать или опускать нос. Лететь прямо не хочет вообще.
Джойстик настроен и откалиброван (центрирован). Есть диапазоны «мертвых зон» по осям Х и У. То есть люфты джойстика исключены.

Для проверки запускаю Elite Dangerous. Там корабль стоит, как вкопанный, пока не сдвинешь ручку джойстка. Почему же в DCS World так? Или это вопрос триммеров? Если да, как их настроить?

Крайне досадно, что нет толковых инструкций по настройке этих вещей. Ни в Lock On СБА, ни в LockOn FC2, ни в DCS World так и не удалось настроить джойстик, все время с самолетом что-то происходит, он вертится, как уж на сковородке.

Очень прошу помочь. Может, есть какие-то видео- или текстовые-инструкции? Мне найти не удалось.

Saitek X52pro краткий мануал по установке

Итак. собственно что меня подвигло написать данное руководство. Очень много жалоб на сей замечательный девайс, что не устанавливается софт, не отображаются данные NAV и др на дисплее и т.д. Не скрою, раньше они возникали и у меня, но ввиду моих частых экспериментов с симом и частой его переустановкой, я выработал некую стратегию по последовательности установки сима и дров и ПО для джойстика, после чего все работает. Все надо выполнять обязательно по пунктам, иначе счастья не видать.

В общем поехали все ставить с чистого листа по порядку:

  1. Устанавливаем FSX + разгон если хотите.
  2. Обязательно запускаем симулятор, и делаем там минимум настроек (графика, детали трафика и т.д).
  3. Выходим из сима.
  4. Начинаем установку ПО Saitek: у меня 64-битная ОС, поэтому названия установочных файлов буду писать под именно 64 битную ОС. Под 32 битной порядок тот же самый.
    1. Saitek_X52Pro_Flight_Controller_SD6_64.exe
    2. Saitek_X52Pro_Flight_Controller_SD6_64_Software_.exe
Читайте также:  Настройка idmss с видеорегистратором

После этого надо зайти по указанным 2-м путям и запустить на исполнение выделенные жирным файлы:

После этого делаем рестарт машины. После рестарта по идее в трее должен появиться значок джойстика. Если нет, то возможно необходимо вытащить и вставить кабель джойстика из USB порта.

После этого запускаем FSX и он обязательно должен спросить о разрешении добавить Saitek как безопасного модуля.

Вы обязательно должны разрешить и согласиться с предложением добавить Saitek в безопасные аддоны.

Так же еще важный момент: после всех вышеописанных манипуляций вы сразу на MFD не увидите никаких изменений. Необходимо выбрать самолет, любой, вместо дефолтного который грузится при запуске сима. После этого на MFD появятся частоты NAV1 и COM. При прокрутке левого колесика под MFD — обнаружите еще много интересного!

Настройка saitek x55 для dcs

Look for X-55 profiles, they are very simular to x-56.

Make a copy of the X-55 pr0 file and open in texteditor (Notepad)
also open the default.pr0 ( X-56) from the Madcatz usermap in Notepad
Find this file in: C:\users\public\Mad Catz\X-56 Rhino.

scroll in rhe x-55 file for:

[controller=ce42e445-968c-4a74-bc30-1b3a6b461ae5 group=’X-55 Control System’
[member=96130127-8156-467c-959a-6129d94f8d48 name=Stick shortname=Stick]

and replace with the text portion from the default.pr0

[controller=a878de15-5a3e-44b3-8128-6ccbbe905bd2 group=’X-56 Control System’
[member=5572b81b-c76b-40fa-8fb6-a3ee6d1a870c name=Stick shortname=Stick]

Do the same with the Throttle part of the files.

Save with a new name. Works like a charm, maybe some minor adaptations.

Look for X-55 profiles, they are very simular to x-56.

Make a copy of the X-55 pr0 file and open in texteditor (Notepad)
also open the default.pr0 ( X-56) from the Madcatz usermap in Notepad
Find this file in: C:\users\public\Mad Catz\X-56 Rhino.

scroll in rhe x-55 file for:

[controller=ce42e445-968c-4a74-bc30-1b3a6b461ae5 group=’X-55 Control System’
[member=96130127-8156-467c-959a-6129d94f8d48 name=Stick shortname=Stick]

and replace with the text portion from the default.pr0

[controller=a878de15-5a3e-44b3-8128-6ccbbe905bd2 group=’X-56 Control System’
[member=5572b81b-c76b-40fa-8fb6-a3ee6d1a870c name=Stick shortname=Stick]

Do the same with the Throttle part of the files.

Save with a new name. Works like a charm, maybe some minor adaptations.

Источник

Настройка saitek x55 для dcs

Hi all, i recently downloaded DCS World to try out with my new Saitek X55 HOTAS. I am having a problem however with my throttle axis and it seems to be in only this game it happens, it doesn’t occur in War Thunder, iL2: CLOD, Elite: Dangerous.

When i’m setting my controls up ingame, it detects both the throttle and joystick as it gives me two seperate collums to map buttons to, three if you include the default controls.

When trying to set the throttle axis it reports back as Axis X, not Axis RX as it should be. However when fiddle with the 4 Rotaries on the Throttle they are being reported as RX, RY, RZ etc.

Does anyone know of a solution to getting the throttle to be read correctly ingame?

Using the Toggle switches and different modes in-game work fine as does the joystick. Only the Throttle and the other axied controls are causing issue.

Hi, check my screenshot, are you able to select the axis manually in the drop down menu? Also I don’t own a X55 but on my TM Hotas Warthog Joystick and Throttle are different controls.

Edit: Just to make sure, you are trying to set them in «Axis Commands» ? (see on my screen right next to SU-25T)

These are the options i get.

Sometimes if i move the throttle fast enough to stop abruptly at 110% it will sometimes report back as Joy_Y instead of Joy_X as it does at the moment.

I’m guessing its a driver/software issue from Saiteks end?

These are the options i get.

Sometimes if i move the throttle fast enough to stop abruptly at 110% it will sometimes report back as Joy_Y instead of Joy_X as it does at the moment.

I’m guessing its a driver/software issue from Saiteks end?

Could be, is the stick officialy released by now?

Btw on your screenshot you are selecting the Thrust axis. Does the Thrust Left axis and Thrust right axis work correctly? And did you try it ingame?

Читайте также:  Ремонт и настройка карбюратора к 151

The Logitech G940 is also reporting back JOY_X/Y axis with the throttle so it can be the way they designed the Axis.

Yeah the X55 was released last month in the UK as far as i’m aware? I ordered it on the 2nd of May from the Mad Catz UK Store (GameShark) and got it on the 6th, it would have been soon but weekend and bank holiday.

However, i’ve just given it a blast with the Thrust Left and Thrust Right and its the exact same deal.

That’s the problem though ARGH, I don’t have a Slidder option. Elite: Dangerous which is in Alpha still recognises all of the Axis’ properly.

I’m only getting options for the 3 Joystick Axis (X, Y and Z) and 3 of the Axis for the rotaries (RX, RY and RZ) and if I remember correctly one of the other rotary Axis comes up as Joy_Y.

I’m at work at the moment so can’t have a look at it at the moment l but it seems most likely a driver issue, I’m going to report it to Saitek and DCS developers when I get home at 7pm.

what the ♥♥♥♥, I’ve been looking for the rhino since Febuary. Apparantly its not going on sale untill next week where I live. Globalization is great except when capitalism and big corps don’t want it (NOT LOOKING TO START AN IDEOLOGICAL DISCUSSION)

On topic: Can you reverse the axis in the saitek software? (If I’m understanding the problem that is..)

I must be explaining myself wrong?

The throttle is being recognised as a actual joystick input and not as a throttle unit input. So if i set use the throttle slider for Thrust, it will come up as Joy_X which is infact the X Axis on my stick. So when i use the throttle it will move the ailerons instead.

Yeah i managed to sort it in the end. I can’t remember what the problem was but i think it was something to do with what you suggested. I haven’t played DCS in a while due to having hard drive issues (on my 3rd windows reinstall since May) but if i remember, due to the HOTAS’ name being so long, it was hard to read what column was what.

Hopefully thats been fixed?

.. due to the HOTAS’ name being so long, it was hard to read what column was what.

Hopefully thats been fixed?

Hovering mouse cursor over the name of column shows full name in a tooltip now.

Tooltip also seems to show GUID for device information and so on.

I have an X55 as well (loving it so far) and yes the left throttle is detected as X (or Y) and the right as the other direction. This isn’t an issue though as your joystick and throttle are detected as two entirely different controllers so the X axis on one won’t step on the other. If you are playing games with a single throttle just make sure you raise one of the two throttles so you only get one axis for the control. After that you can raise both at the same time so long as you don’t link the other throttle to something. Anyway hope this helps, but from what I’ve seen it appears to be working as intended.

Have fun! It’s a great stick and really made A-10c and Black Shark much more enjoyable. Also it’s nice only having to load a profile once when I turn on my PC (I liked a button to center my TrackIR) rather than for each aircraft and different sims/games. Having to switch between my A-10 profile and BS profile sucked and since the profiles had to use keypresses rather than buttons/sliders it could cause issues where I would forget that a slider was activating a button and so it would continue to broadcast that button whether I was in game or not, or in another game!

Источник

Adblock
detector